SFR series SFR For PS / ABS SUBSTRATES This ink is a solvent-based screen printing ink formulated for ABS, PS, PC, PMMA.
END USES Toy and gift, label, displays, electrical application decorations.
PRODUCT INFORMATION Medium drying and gloss ink, non-corrosive to substrates.
APPLICATION INFORMATION MESH Monofilament mesh, 80T-120T.
STENCIL Using organic solvent resistant emulsions.
SQUEEGEE 65-85 durometer solvent resistant blade, such as PU.
COVERAGE 40 square meters per kilogram under 140T mesh.
PRINTING This ink should be thinned with thinner approximately 10-20% by weight base on the climate condition.
DRYING Drying by solvent evaporation. Surface dry needs 15-20 minutes, complete dry allows at least 2 hour. (Drying time depends on actual weather condition and thinner usage)
CURE Force to dry with hot dryer below 100º Cis allowed.
ADHESION TESTING Adhesive tape test-use adhesive tape to stick on test surface and rip off, no ink should come off from test areas obviously.
CLEAN UP Using organic solvent to clear the stencil. PRODUCT RANGE AND PACKAGE All of the colors are available in 1KG, 5KG and 20KG containers.
CAUTION This ink does not have alcohol resistance. It's the printer's responsibility to pretest the ink selected prior to engaging in a production run. Allow at least 24 hours after test printing to evaluate the suitability of the ink and its adhesion to the surface. Before using, the printer shall determine the suitability of the Product for its intended use.